GE P&W SeaPRO-E-105 - 1500 m3_day (275 gpm) User Manual
Seapro e-series, 1500 m, Day (275 gpm) seawater desalination machine
![background image](/manuals/286379/1/background.png)
Find a contact near you by visiting www.ge.com/water and clicking on “Contact Us” .
* Trademark of General Electric Company; may be registered in one or more countries.
©2009, General Electric Company. All rights reserved.
FSpwSeaPRO-E-1500_EN.doc Sep-09
Fact Sheet
SeaPRO E-Series
1500 m
3
/day (275 gpm) Seawater Desalination Machine
General Features
• Major components skid-mounted for easy
installation and dependable operation
• Variable frequency drive (VFD) for high pressure
pump optimal control, energy efficiency and
constant water production
• Simple manual control for the system, and
Hand/Auto control for remote starting and
stopping of the system
Operating Parameters
Recovery.............................................................................. 45%
Design temp......................................................... 25ºC (77°F)
Operating range ...............................15-32°C (59-90°F)
1)
Design Feed TDS..................................................... 45k ppm
Nominal rejection............................................................ 99%
Minimum inlet pressure ..........................2 bar (30 PSIG)
1)
Varying the operating temperature may affect permeate rate
Materials of Construction
High-pressure piping..............Sch 40 SS Duplex 2205
Low-pressure piping......Sch 80 PVC-U DIN PN10/16
Frame...................Anti-corrosion treated carbon steel
Frame Finish .......2-coat epoxy painted & blue finish
Enclosures...............................................IP55
carbon steel
Membranes........................440 sq. ft. SWRO, 99.5% rej.
Membrane Housing .....FRP 8in-1200psi-7M (82 bar)
Cartridge Filters................... 5-micron nominal, Hytrex
Cartridge Filter Housing.................................................FRP
• Standard package includes energy recovery
device for operating cost savings
• Flow and Conductivity 4-20mA signals available
for remote monitoring/recording
Table 1: Standard Instrumentation
Flow (magnetic)
Permeate, Concentrate
Conductivity
Permeate
Pressure Switch
Feed LP, Feed HP,
Concentrate, Permeate
Pressure Indicators
Pump suction,
Pump discharge,
ERD HP discharge,
ERD LP discharge,
Permeate, Concentrate
Figure 1. SeaPRO-E-105 General Layout (reference only)