GE P&W Pleated Filters - Flotrex GF Capsule Pleated Filters - Manual (Page 2)

Operational Limits
Page 2 FS1072EN
Max. Operating Pressure 80 psi (5.5 bar) @ 70ºF (21ºC) in Liquid
55 psi (3.8 bar) @ 70ºF (21ºC) in Gas
Max. Differential Pressure 60 psi (4.1 bar) @ 70ºF (21ºC)
Max. Operating Tempera-
ture 110ºF (43ºC) at ≤ 30psi (2.1 bar)
operating pressure
Additional Information
Flotrex GF filters may be autoclaved or in-situ steam
sterilized (up to 257°F [125°C], 30 minute
cycles) for a maximum accumulated exposure of
10 hours. Alternatively, the filters may be sanitized
with compatible chemical agents.
GE certifies that the materials contained in its
Flotrex GF Capsule filters meet U.S. FDA require-
ments for food contact under the applicable regula-
tions in 21 CFR. For further information, contact the
GE Technical Services Department. Flotrex GF
filters meet the test criteria for USP class
VI-121ºC Plastics.
GE filter capsules are designed and manufactured
for resistance to a wide range of chemical solutions.
Conditions will vary with each application and users
should carefully verify chemical compatibility. Please
contact your GE distributor for more information.
Figures 2, 3 and 4 show the test data results of flow
performance for the small, medium and large
Flotrex GF Capsule Filters using a 10-inch
length filter. Table 2 provides ordering information.
For more information
• Email: [email protected]
• Tel: 800-444-8212 USA
• Canada Tel: 952-988-6665
• Web: www.geosmolabstore.com
Table 2: Ordering Information
Figure 2: Flotrex small capsule flow performance in clean
water 1
Figure 3: Flotrex medium capsule flow performance in clean
water 1
Figure 4: Flotrex large capsule flow performance in clean
water 1
1. Data Based on 10-inch length filter
Type Absolute Micron Rating Capsule Size Connections
CFGF 94 = 0.45µm
01 = 1.0µm
03 = 3.0µm 05 = small
19 = medium
37 = large L = ¼”- ½" hose barb
M = 3/8" hose barb
R = ¼” NPT male
W = ½” NPT male
Y = 1.5" sanitary flange