Peerless-AV ACC556 - Installation - Manual

1 of 3 ISSUED: 01-11-93 SHEET #: 128-9007-2 11-16-04
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
For customer service, or to
order accessory kits call
1-800-729-0307 or
708-865-8870
Max. Load Capacity:
300 lb (137 kg)
Fully thread flush mount tube into threaded fitting in
lower ceiling bracket (B).
Note: If you will install an extension column do not
install flush mount tube. Begin with step 2.
Flush Mount
Tube (included
with Jumbo
Mount Bracket)
B
For Wood Joist Finished Ceiling, Exposed Wood
Joists, or Wood Beam Ceiling. (See for concrete
ceilings). Drill two 5/32" (4 mm) dia. holes to a
minimum depth of 2.5" (64 mm). Attach upper ceiling
bracket (A) with two #14 x 2.5" (6 mm x 65 mm)
wood screws (F).
PARTS LIST
PART # QTY. DESCRIPTION
A 1465-273 1 upper ceiling bracket
B 2JM-11CP01L 1 lower ceiling bracket
C 520-9215 4 3/8-16 x 3/4" carriage bolt
D 540-9407 4 flat washer
E 530-9310 4 3/8-16 nylock nut
F 5S1-015-C04 2 #14 x 2.5" (6mm x 65mm) wood screw
G 520-9250 1 M5 x .8 x 10mm phillips screw (for use
with extension column if applicable)
F
wall
A
joist
ceiling
Note: Read entire instruction sheet before beginning
installation and assembly.
Installation and Assembly - Cathedral Ceiling Adapter Model: ACC 556
CEILING CONSTRUCTION ADDITIONAL HARDWARE REQUIRED
Wood Joist, Wood Beam none
Concrete, Concrete Anchor Kit - order accessory kit ACC 200.
Note: Some units may already include concrete anchors.
Other or unsure? Consult a qualified professional installer or call
Peerless Customer Service.
IMPORTANT! Certain ceilings require additional mounting hardware...
R
This product is intended for use with UL
Listed products and must be installed by a
qualified professional installer.
• Tighten wood screws so that ceiling bracket is firmly
attached, but do not overtighten. Overtightening can
damage the screws, greatly reducing their holding
power.
• Never tighten in excess of 80 in. • lb (9 N.M.).
WARNING