beautypg.com

Peerless-AV ACC931-S - Installation User Manual

Warning, Cc dd, Parts

background image

ISSUED: 07-03-07 SHEET #: 120-9037-2 08-27-10

Visit the Peerless Web Site at www.peerlessmounts.com

For customer care call 1-800-729-0307 or 708-865-8870.

1 of 1

Parts

ACC931 ACC931-S

Description

Qty. Part #

Part #

AA VCR/DVD bracket

1 201-1161

201-4161

B B M5 x 8 mm phillips screw

4

570-0005

570-0005

CC M5 x 20 mm phillips screw

4

510-1208

510-1208

DD spacer

4 540-1057

540-1057

Installation and Assembly - Flat Panel Accessory for
VCR/DVD Mount

Models: ACC931,
ACC931-S

Some parts may appear slightly different than illustrated.

AA

Before you start make sure all parts listed are included with your product.

IMPORTANT! Read instruction sheet before you start installation and assembly.

Attach VCR/DVD bracket (AA) to back of adapter
plate (sold separately) using the four screws
included with adapter plate (sold separately) as
shown below. Tighten screws using 4 mm security
allen wrench included with adapter plate.

Note: Some parts may appear slightly different
than illustrated.

• Do not overtighten! Overtightening may cause permanent damage to the screen. Torque to 26-35 in • lb

(30-40 kg • cm).

WARNING

BB

BB or CC

Attach VCR/DVD mount (sold separately) to VCR/
DVD bracket (AA) using four M5 x 8 mm philips
screws (BB) as shown below.
Note: If using model SP850-UNL mount, Attach
VCR/DVD mount to VCR/DVD bracket (AA) using
four M5 x 20 mm philips screws (CC) and four
spacers (DD) as shown below.

2

1

AA

AA

CC

DD

DD

Spacers (DD) are used between
bracket (AA) and VCR/DVD
mount on model SP850-UNL only

© 2007, Peerless Industries, Inc. All rights reserved.

All other brand and product names are trademarks or registered trademarks of their respective owners.