Peerless-AV EXC-W - Installation - Manual (Page 11)

11 of 11 ISSUED: 1-11-08 SHEET #: 055-9495-3 09-18-12
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112 or 708-865-8870.
For PRG swivel adjustment: Loosen two screws indicated in fi gure 9.1 half a turn using allen wrench (P) to allow
for adjusting swivel. Align projector to the desired swivel position and fully tighten screws indicated.
For PRS swivel adjustment: Loosen two screws indicated in fi gure 9.1 half a turn using allen wrench (P) to allow
for adjusting swivel. Align projector to the desired swivel position and fully tighten screws indicated.
To adjust tilt and roll, refer to instruction included with projector mount.
Projector Alignment
9
20° (±10°) SWIVEL
• Do not loosen adjustment screws to the point they become disengaged from the mount. Weight of the projector
should be supported in case of accidental disengagement.
WARNING
SWIVEL A D J U S T M E N T
TOP VIEW
© 2012, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
SCREWS FOR SWIV-
EL ADJUSTMENT
SWIVEL ADJUSTMENT WITH PRG
fi g. 9.1
SWIVEL ADJUSTMENT WITH PRS
fi g. 9.2
SCREWS FOR SWIV-
EL ADJUSTMENT