Peerless-AV PLP-SH65 - Installation User Manual
Warning, Bb aa, Aa bb
ISSUED: 10-25-05 SHEET #: 202-9053
Visit the Peerless Web Site at www.peerlessmounts.com
For customer service call 1-800-729-0307 or 708-865-8870.
1 of 1
Installation and Assembly - Plasma Adapter Bracket for
65" Sharp
™
LC-65D90U Plasma Screen
Model: PLP SH65
Some parts may appear slightly different than illustrated.
BB
AA
Before you start make sure all parts listed are included with your product.
This product is UL Listed. It
must be installed by a qualified
professional installer.
R
IMPORTANT! Read instruction sheet before you start installation and assembly.
CC
Attach adapter bracket (AA) to back of plasma screen using four M10 x 15 mm penta pin screws (BB) as shown.
Tighten M10 x 15 mm penta pin screws (BB) using M10 x 2" penta pin tool (CC).
Parts List
TS LIST
Description
Qty.
Part #
AA adapter bracket
1
201-1010
BB M10 x 15 mm penta pin screw
4
520-9263
CC M10 x 2" penta pin tool
1
520-9260
© 2005 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
• Do not overtighten! Overtightening may cause permanent damage to the screen. Torque to 26-35 in • lb (30-40 kg • cm).
WARNING
AA
BB