Peerless-AV IM760PU-S - Installation - Manual (Page 8)

8 of 12 ISSUED: 12-04-07 SHEET #: 095-9279-8 (2013-10-01)
NOTE: For installing display using universal adapter plate, skip to step 5.
Identify VESA mounting pattern on back of your display and choose hole pattern on adapter plate and required
fasteners as shown in fi gure 4.2.
Secure adapter plate to back of display as shown in fi gure 4.1 using fasteners indicated in fi gure 4.2 .
NOTE: If hole pattern is in a pocket and requires M4 screws, attach adapter plate to back of display using four
M4 x 30mm screws (N) and four retaining spacers (R) as indicated in fi gure 4.1.
NOTE: Spacers may not be used, depending upon the type of display.
Skip to step 7
4
Attaching Adapter Plate to Display with
VESA
® Mounting Pattern
Mounting Patterns
VESA ® 100 x 200 VESA ® 200 x 200
ADAPTER
PLATE
fi g. 4.2
DISPLAY • If screws don't get three complete turns in the
display inserts or if screws bottom out and adapter
plate is still not tightly secured, damage may occur
to display or product may fail.
• Do not tighten screws with excessive force.
Overtightening can cause damage to mount.
• Do not lift more weight than you can handle. Use ad-
ditional man power or mechanical lifting equipment
to safely handle placement of the display.
WARNING
M6 x 20mm (O), M6 x 30mm (P)
or M6 x 40mm screws (Q)
fi g.4.1
M4 x 20mm screws (M) or
M4 x 30mm screws (N) with spacer (R)
NOTE: For displays with a hole
pattern in a pocket,
spacers go between
adapter plate and display
when using M4 x 30mm
screws.