Peerless-AV IM760PU-S - Installation - Manual (Page 7)

7 of 12 ISSUED: 12-04-07 SHEET #: 095-9279-8 (2013-10-01)
Installing Arm to In-wall Box
Insert arm axle (C) through arm assembly (A) as shown
in fi gure 2.1.
Position arm axle (C) and arm assembly (A) into axle
support bracket of in-wall box (B) then seat arm axle
through bottom hole of in-wall box as shown in fi gure 2.2.
Secure arm axle to in-wall box using four M5 x 12mm
phillips screws (L) as shown in fi gure 2.3.
2 C
A
fi g. 2.1
fi g. 2.2
fi g. 2.3
AXLE
SUPPORT
BRACKET
C
A
C
L
Insert tabs of outer trim (D) into notches of
in-wall box (B) as shown in fi gure 3.1. 3
Installing Outer Trim
D
B
TABS
NOTCHES
fi g. 3.1
B