Peerless-AV IM760PU-S - Installation - Manual (Page 12)

12 of 12 ISSUED: 12-04-07 SHEET #: 095-9279-8 (2013-10-01)
For optional installation of UL listed single receptacle electrical box, access plates located on the bottom or top of
in-wall box can be temporarily removed to install electrical box as shown in fi gure 9.1.
Insert up to eight cable management clips (J) into the desired positions in the arm assembly and in-wall box as
shown in fi gure 9.2 for routing cables.
Insert cable bushing (F) into top or bottom hole of in-wall box for routing cables through in-wall box. Plastic
fi nishing caps (H) can be used in holes where cables are not being routed.
NOTE: Make sure cables have enough slack to allow full movement of the arm.
Use cable ties (G) to secure cables to cable management clips as shown in fi gure 9.3.
Cable Management
9
J
J
J
F or H
G
CABLES
fi g. 9.2 fi g. 9.3
fi g. 9.1
ACCESS
PLATE
9-1
© 2013, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
Patented. Utilty Patent No. 8,348,212; 8,517,322; 8,028,964; 1110143B; ZL2007100841191.
DISPLAY NOT SHOWN FOR CLARITY
DISPLAY NOT SHOWN FOR CLARITY