Peerless-AV SP850-V2X2 - Installation - Manual (Page 7)

7 of 10 ISSUED: 01-17-12 SHEET #: 125-9277-1
DETAIL 2
Figure 4.1
FOR VESA 200 mm x 200 mm MOUNTING PATTERN:
Thread two M6 x 12 mm socket pin screws ( FF) with 1/4" flat washers (EE) or M8 x 12 mm socket pin screws (GG),
leaving .25" exposed thread, into top holes on back of screen as shown in figure 4.1.
Hook screen onto mounting plate slots, and attach using two bottom M6 x 12 mm socket pin screws ( FF) with 1/4"
flat washers ( EE) or M8 x 12 mm socket pin screws (GG) as shown in figures 4.2 and 4.3. Tighten all four screws.
NOTE: Only use 1/4" flat washers (EE) with M6 x 12 mm socket pin screws (FF).
1/8"
DISPLAY
DISPLAY
DISPLAY
TOP SLOT
A
A
A
MOUNTING PLATE
Figure 4.2
Figure 4.3
MOUNTING PLATE
EE
FF or GG
EE
FF or GG
NOTE: Only use 1/4" flat washers (EE) with
M6 x 12 mm socket pin screws ( FF).
DETAIL 1
FF
EE
4