Bc aa 9 – Peerless-AV SP850-V2X2 - Installation User Manual

Page 10

10 of 10

ISSUED: 01-17-12 SHEET #: 125-9277-1

Roll can be adjusted 1° clockwise or

counterclockwise.
To adjust roll, loosen screen fasteners slightly,

leaving them snug. Level screen, then tighten screen

fasteners.
NOTE: When adjusting roll, screws should be

retightened as indicated in step 4.

Optional: To lock one sliding arm of mount in place,

slide locking tab (

B) over top or bottom of sliding arm

and attach to mount using one M5 x 10 mm screw

(

AA) and one spacer (C).

Note: Screen not shown for clarity.

SLIDING ARM

SCREEN FASTENER