Warning – Peerless-AV SP850-V2X2 - Installation User Manual
Page 6
6 of 10
ISSUED: 01-17-12 SHEET #: 125-9277-1
INSTALLATION TAB
A
SLIDING ARM
Place installation tab over sliding arms of wall mount assembly (
A) to lock them in place.
3
• If screws don't get three complete turns in the screen inserts or if screws bottom out and adapter plate is still not
tightly secured, damage may occur to screen or product may fail. Contact customer care for correct hardware to
use.
WARNING
Find the VESA
®
hole pattern as shown below, and attach screen to mounting plate as specified below. Verify that all
holes are properly aligned, and then tighten screws. If using security screws,
tighten using security allen wrench (
M).
4
VESA 100 x 100
VESA 200 x 100
FOR VESA 100 MOUNTING PATTERN:
Thread two M4 x 12 mm screws (
BB), leaving .25" exposed thread, into top holes on back of screen. Hook screen
onto mounting plate, and attach using bottom two M4 x 12 mm screws as shown in figures 4.4 and 4.5. (page 8)
Tighten all four screws.
Note: If screw (BB) is too small to engage threaded inserts, attach mounting plate to back of screen using
four M5 x 10 mm screws (
AA).
VESA 200 x 200