Peerless-AV ACC-SB - Installation - Manual (Page 5)

5 of 5 ISSUED: 03-08-11 SHEET #: 125-9197-2 05-16-11
2 Attach adapter bracket (A) to extension bracket
(C) and speaker bracket (B) using two M5 x 6 mm
socket pin serrated washer head screws (F) as
shown below. 3
4 Hook adapter bracket (A) onto wall arm (not included) and secure using lock bracket (E) and two
M5 x 6 mm socket pin serrated washer head screws (F) as shown in detail 2.
DETAIL 2
MYTHOS-XTR50 OR MOTION 6
(AS SHOWN) (NOT SHOWN)
F
A
G or H
B
SPEAKER WIRES
F
F
B
A
E
I
Attaching Speaker Using Extension Bracket
NOTE: Make sure that speaker wires are
connected as indicated in speaker instructions
before attaching speaker bracket (B).
Secure speaker bracket (B) to speaker using two
1/4-20 socket pin screws (G or H), and two
1/4 fl at washers (I).
WALL ARM
(NOT INCLUDED)