Peerless-AV ACC937 - Installation - Manual (Page 2)

2 of 2
SUPERSEDING COPY 200-9194revA 03-28-01/ m.b.
ISSUED: 05-16-08 SHEET #: 120-9047-3 09-19-08
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
attach extension adapter brackets ( A) using two M6 x 12 mm phillips screws (B) and two M6 flange nuts (C) for
each bracket as shown in fig 2.1. If attaching extension adapter brackets ( A) to OnE-TP adapter bracket fasten
two multi-washers ( e) using two M6 x 12 mm phillips screws (B) and two M6 flange nuts (C) for each bracket as
shown in fig 2.2.
NOTe: For tilt adapter brackets with a tension knob, be sure flange is pointing in the same direction as the
tension knob.
Secure adapter brackets to screen using four M10 x 15 mm screws ( D) as shown below.
2
3
D D
© 2008, Peerless Industries, Inc. all rights reserved.
all other brand and product names are trademarks or registered trademarks of their respective owners.
• Do not overtighten. Overtightening may cause permanent damage to the screen.
WARNING
A
B
B
C
C
FlangE
A
B
B
C
C
FlangE
TEnSIOn
knOb
A
B
B
C
C
e
FlangE
fig 2.1 fig 2.2
TEnSIOn
knOb
SMaRT MOUnT aDaPTER bRackETS OnE-TP aDaPTER bRackETS
SMaRT MOUnT aDaPTER bRackETS OnE-TP aDaPTER bRackETS