Peerless-AV HDS-S - Installation - Manual (Page 2)

ISSUED: 03-11-11 SHEET #: 125-9196-1 2 of 3
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-865-2112.
2
DRYWALL
• Drywall must be 1/2" or thicker.
• Make sure that the wall will safely support the combined load of the equipment and all attached hardware and
components.
• Using a power drill to secure anchors may cause anchors to fail.
WARNING
Installation to Drywall
NOTE: Flange on wall shelf faces upward.
Using wall shelf ( A) as a template, mark the center of the two mounting holes. Using a phillips screwdriver, install
two anchors ( C) into drywall as shown below.
Loosely fasten wall shelf ( A) to drywall using two #8 x 1” phillips head screws (D).
Level, hold, and then tighten all screws.
1
A
B
C
NOTE: MAKE SURE
THAT ANCHORS ( C)
ARE LEVEL
TOP
NOTE: FLANGE FACES UPWARD
5.5"
(140mm)