Peerless-AV WSP445 - Installation - Manual (Page 4)

ISSUED: 12-06-95 SHEET #: 024-9001-3 11-30-06
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
4 of 4
Attach wall plate (A) with 1/4-20 x 2.5" phillips
screws (C), and washers (E).
Four 1/4-20 x 1/2" phillips screws (B), and four
washers (E) are provided to attach wall mount bracket
(sold separately) to wall plate.
A
E
C
Step 5 covers attachment to a wood stud wall.
FOR WOOD STUD WALLS ONLY drill four 5/32" (4 mm)
dia. holes 2 1/2" (65 mm) deep. Attach wall plate (A)
using four #14 x 2.5"(6 mm x 65 mm) wood screws (F).
Four 1/4-20 x 1/2" phillips screws (B), and four washers
(E) are provided to attach wall mount bracket (sold
separately) to wall plate.
F
© 2006 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
• Tighten wood screws so that wall plate is firmly
attached, but do not overtighten. Overtightening can
damage the screws, greatly reducing their holding
power.
• Never tighten in excess of 80 in • lb (9 N.M.).
• Make sure that mounting screws are anchored into the
center of the studs. The use of an "edge to edge" stud
finder is highly recommended.
WARNING
A