Peerless-AV ACC109 - Installation User Manual
Warning, Parts list
ISSUED: 01-17-00 SHEET #: 026-9005-2 10-28-04
Visit the Peerless Web Site at www.peerlessindustries.com
For customer service call 1-800-729-0307 or 708-865-8870.
1
of
1
B or C
A
B or C
Installation and Assembly - Extension Column Connector
Model: ACC 109
IMPORTANT! Read entire instruction sheet before you start installation and assembly.
PART #
QTY.
DESCRIPTION
A
580-1010
1
extension column connector
B
520-9250
2
M5 x .8 x 10 mm phillips screw
C
520-1063
2
M5 x .8 x 10 mm socket pin screw
D
560-9646
1
4 mm security allen wrench
E
520-1187
2
#10-32 x 3/16" slotted set screw
Parts List
Some parts may appear slightly different than illustrated.
Before you start make sure all parts listed are included with your product.
B
A
Attach extension column connector (A) to exten-
sion column. Align slot in extension column with
one of the holes in extension column connector
(A). Insert and tighten one phillips screw (B)
through connector (A) into slot on extension
column.
Note: For security option, use security screw (C)
in place of screw (B). Tighten security screw (C)
using 4 mm security allen wrench (D)
Repeat step one with second extension column.
Note: To prevent columns from unwinding when
mount is swiveled, both screws (B) or (C) must be
inserted.
Note: Slotted set screws (E) are used to jam
against the threads of each connecting joint to
prevent any excess movement. Do not overtighten
screws; overtightening screws will damage threads
making it difficult to separate the products.
C
D
R
This product is intended for use with UL Listed
products and must be installed by a qualified
professional installer.
MAXIMUM LOAD CAPACITY: 1200 lb (544 kg)
© 2004 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
E
E
E
slot
extension column
A
extension column
slot
• For TV mounts: If equipment weighs over 50 lb, and
the extension exceeds 12', a Stress Decoupler
(models DCT 100/DCS 200) must be used in combina-
tion with EXT extension columns.
WARNING