Peerless-AV FLD-UNV-S - Installation - Manual (Page 2)

ISSUED: 07-05-05 SHEET #: 124-9422-2 05-07-08
For customer service call 1-800-729-0307 or 708-865-8870. Visit the Peerless Web Site at www.peerlessmounts.com
2 of 3
+
+ +
A
Position the front lockdown bracket (A) by adding 1.035" with measurement x in step 3 as shown in detail 2.
Attach to desktop using two #8 x 3/4" phillips screws (H).
NOTE: If feet on base are taller than 1/8", use washers (G) between bracket (A) and desktop to achieve
desired height as shown in detail 3.
A
BOTTOM VIEW
B B
SIDE VIEW SIDE VIEW
TV STAND TV STAND
DESKTOP DESKTOP
A A
FRONT EDGE OF STAND
1.035
(26)
X
DETAIL 2
B
BOTTOM VIEW
Flip TV stand right side up and slide into front lockdown bracket (A) so that screw in hole 1 locks securely
into slot of bracket.
ATTACHMENT POINT
Remove rubber feet or screws from one or two locations on back of stand depending on stand. Remove rubber feet
or screws from one or two locations on front of stand. Attach back lockdown brackets (B) to stand with screws (E).
On front location(s) leave 3/16" gap between stand and screw (E).
H
H
DETAIL 3
G
IDEAL ALTERNATE
OR
FRONT OF
STAND
FRONT OF
STAND
DESKTOP
A
G