B&B Electronics EIRP305-T - Manual - Manual (Page 12)

9 Manual Documentation Number EIRP305-T – 0912m
www.bb-elec.com
www.bb-europe.com
Network Application
3. First, insert the top of DIN rail clip onto the piece DIN rail track.
4. Then, lightly push the bottom of the switch so it can snap the rest of the way onto the
DIN rail track.
5. Check that the switch is held tightly to the DIN rail track.
6. To remove the switch from the track, reverse the steps above.
• First pushing down lightly on the switch will give enough room for the bottom of
the switch to clear the bottom of the DIN rail track.