B&B Electronics 316TX-N - Manual - Manual (Page 29)

(Revised 2010-7-30) 29
Fiber Transceiver Characteristics
Fiber Length: 2km* 15km** 40km** 80km**
TX Power Min -19dBm -15dBm -5dBm -5dBm
RX Sensitivity Max: -31dBm -31dBm -34dBm -34dBm
Wavelength: 1310nm 1310nm 1310nm 1550nm
*=Multimode ** =Singlemode
Recommended Wiring Clearance:
Top: 1 " (2.54 cm)
Front: 4 " (10.16 cm)
Regulatory Approvals:
Safety: Suitable for use in Class I, Division 2, Groups A, B, C and D Hazardous Locations, or Nonhazardous
Locations only.
ATEX Zone 2, Category 3G, II 3G Ex nA IIC (DEMKO 03 ATEX 0316686U)
EMI:
EN61000-6-4, EN55011 – Class A
FCC 47 CFR, Part 15, Subpart B -Class A
EMS: EN61000-6-2
EN61000-4-2 (ESD)
EN61000-4-3 (RS)
EN61000-4-4 (EFT)
EN61000-4-5 (Surge)
EN61000-4-6 (Conducted Disturbances)
Conducted Low Frequency: IEC60533
Shock:
IEEE 1613 (250 mm)
Vibration: IEEE 1613 (V.S.4 150 mm/s)
IEC60068-2-6 (Test F
c
)
Cold: IEC60068-2-1
Dry Heat: IEC60068-2-2
Damp Heat: IEC60068-2-30 (Test D
b
)
GOST-R Certified.
Warranty: Effective January 1, 2008, all N-TRON products carry a 3 year limited warranty from the date of purchase.