B&B Electronics 316TX-N - Manual - Manual (Page 17)

(Revised 2010-7-30) 17
Software Configuration
Command Line Interpreter
You can configure and/or query all the important parameters of an N-Tron 308FX2/309/316/317 Industrial
Ethernet switch using a command line interpreter. These functions may be accessed using the serial port
(marked COM).
To access the Command Line Interpreter (CLI), connect a PC serial port to the 308FX2/309/316/317 V24
serial port and use HyperTerminal or equivalent.
COM Parameters:
9600, 8, none, 1, none
After a successful connection and reboot, the boot menu should be displayed:
Self Test & System Initialization Complete..... OK!
N-TRON Industrial Ethernet Switch - Model Number: 317 FX-N.
N-Tron firmware version : 1.01 (03,03)
Copyright (c) 2010 N-TRON
MAC ADDRESS: 00-07-AF-11-22-33
N-View is ENABLED.
Login - (Enter Username)>
N-View is enabled on a –N unit.
This information includes the model number, firmware version, and MAC address.
Also, information is presented as to which functions are enabled, for example in this case above:
- N-View
TM
is reported as enabled (default).