B&B Electronics 3PCIOU4 - Manual - Manual (Page 3)

Document Number 3PCI-0712m Table of Contents i
CAUTION:
This is an Electrostatic Sensitive Device. Use ESD precautions for safe
handling.
Before removing the card from the anti-static protective packaging:
Discharge any static electricity buildup on your body by touching a large
grounded metal surface or the metal chassis on equipment connected
to earth ground by a 3-wire power cord. Use of a grounding wrist strap
is recommended.
Avoid touching the gold connectors or other parts on the card except
when necessary to set the configuration DIP switches.
Remove AC power from the computer before inserting the card
2010 B&B Electronics. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photography, recording, or any information storage and retrieval system without written consent. Infor mation
in this manual is subject to change without notice, and does not represent a commitment on the part of B&B Electronics.
B&B Electronics shall not be liable for incidental or consequential damages resulting from the furnishing, performance, or us e of
this manual.
All brand names used in this manual are the registered trademarks of their respective owners. The use of trademarks or other
designations in this publication is for reference purposes only and does not constitute an endorsement by the trademark holder.