B&B Electronics 854-11121 - Manual - Manual (Page 9)

5
Hardware Mounting Options
The IE-MultiWay can be mounted on a DIN Rail or using a wall mount bracket
(shown below). DIN Rail clips (part number 806-39105) and wall mount brackets
(part number 895-39229) are available for purchase through an IMC Networks
Distributor.
The IE-MultiWay can be mounted with two DIN Rail clips, a hardware option
available through IMC Networks. The DIN Rail clips include screws, to allow the
installation onto a DIN Rail. Install the screws into DIN Rail clips, which can be
mounted parallel or perpendicular to the DIN Rail. Snap the converter onto the
clips. To remove the converter from the DIN Rail, use a flat-head screwdriver into
the slot to gently pry the converter from the rail. Refer to picture on page 7.
NOTE
The DIN Rail clips are designed for use on a DIN-35 rail.