B&B Electronics MODSCAN32 - Manual - Manual (Page 35)

35
ModScan will attempt to convert the values contained within the selected
registers as the IEEE value. If the bit pattern contained within the register set
matches the criteria for a floating point number, the value will be displayed on
the lower document splitter view as a decimal value associated with the first
register address of the pair.
Swapped Dbl Register Values are displayed in floating point notation, (least significant register
first). Use this command to display the contents of modbus registers as floating
point values based on interpretation of four consecutive registers, (64-bits),
according to the IEEE specification for double-precision numbers.
ModScan will attempt to convert the values contained within the selected
registers as the IEEE value. If the bit pattern contained within the register set
matches the criteria for a floating point number, the value will be displayed on
the lower document splitter view as a decimal value associated with the first
register address of the pair. . The difference between this option and the normal
Floating Pt display option is the order of the registers with respect to the IEEE
standard.
Hex Addresses Displays the addresses of data points in hexadecimal notation. Use this command
to display the addresses associated with a modbus data point in hexadecimal
notation rather than decimal.