Rainbow Electronics MAX510 - Manual (Page 3)

MAX509/MAX510
Quad, Serial 8-Bit DACs
with Rail-to-Rail Outputs
_______________________________________________________________________________________ 3
ELECTRICAL CHARACTERISTICS (continued)
(VDD = +5V ±10%, VSS = 0V to -5.5V, VREF = 4V, AGND = DGND = 0V, RL = 10k Ω , CL = 100pF, TA = TMIN to TMAX,
unless otherwise noted.)
PARAMETER CONDITIONS MIN TYP MAX UNITS
Input Voltage Range
SYMBOL
V SS V DD V
MAX509 16 24
MAX510
Input Resistance (Note 1)
8 12
k Ω Code = 55 hex
MAX509 15
(Note 4) AC Feedthrough -70 dB
(Note 3) Channel-to-Channel Isolation -60 dB
MAX510
Input Capacitance (Note 2)
30
pF Code = 00 hex
10
2
VREF = 4V, load regulation
≤
1/4LSB 2
Full-Scale Output Voltage V SS V DD V
Resistive Load
10
k Ω
Input High Voltage 2.4 V V IH
VREF = -4V, V SS = -5V ±10%,
load regulation ≤ 1/4LSB
VREF = V DD MAX5_ _C/E,
load regulation ≤ 1LSB
VREF = V DD MAX5_ _M,
load regulation ≤ 2LSB
Input Low Voltage 0.8 V V IL
V IN = 0V or V DD Input Current 1.0 µA I IN
(Note 5) Input Capacitance 10 pF C IN
I SOURCE = 0.2mA Output High Voltage V DD - 0.5 V V OH
I SINK = 1.6mA Output Low Voltage 0.4 V V OL
MAX5_ _E 0.7
MAX5_ _C 1.0
MAX5_ _M
Voltage-Output Slew Rate
0.5
V/µs Positive and negative
To 1/2LSB, 10k Ω II 100pF load Output Settling Time (Note 6) 6 µs
Digital Feedthrough 5 nV-s
Wideband Amplifier Noise 60
MHz VREF = 0.5V p-p , 3dB bandwidth Multiplying Bandwidth 1
VREF = 4V p-p at 1kHz, V DD = 5V,
code = FF hex
Digital-to-Analog Glitch Impulse
87
Code 128➝127 12 nV-s
Code = 00 hex, all digital inputs
from 0V to V
DD
Signal-to-Noise + Distortion Ratio
VREF = 4V p-p at 20kHz, V SS = -5V ±10% 74
dB SINAD
µV RMS
REFERENCE INPUTS
DAC OUTPUTS
DIGITAL INPUTS
DIGITAL OUTPUTS
DYNAMIC PERFORMANCE