Rainbow Electronics AT45DB041E User Manual
Features, Advance datasheet
Table of contents
Document Outline
- Features
- Description
- 1. Pin Configurations and Pinouts
- 2. Block Diagram
- 3. Memory Array
- 4. Device Operation
- 5. Read Commands
- 5.1 Continuous Array Read (Legacy Command: E8h Opcode)
- 5.2 Continuous Array Read (High Frequency Mode: 1Bh Opcode)
- 5.3 Continuous Array Read (High Frequency Mode: 0Bh Opcode)
- 5.4 Continuous Array Read (Low Frequency Mode: 03h Opcode)
- 5.5 Continuous Array Read (Low Power Mode: 01h Opcode)
- 5.6 Main Memory Page Read
- 5.7 Buffer Read
- 6. Program and Erase Commands
- 6.1 Buffer Write
- 6.2 Buffer to Main Memory Page Program with Built-In Erase
- 6.3 Buffer to Main Memory Page Program without Built-In Erase
- 6.4 Main Memory Page Program through Buffer with Built-In Erase
- 6.5 Main Memory Byte/Page Program through Buffer 1 without Built-In Erase
- 6.6 Read-Modify-Write
- 6.7 Page Erase
- 6.8 Block Erase
- 6.9 Sector Erase
- 6.10 Chip Erase
- 6.11 Program/Erase Suspend
- 6.12 Program/Erase Resume
- 7. Sector Protection
- 8. Security Features
- 9. Additional Commands
- 10. Deep Power-Down
- 11. Buffer and Page Size Configuration
- 12. Manufacturer and Device ID Read
- 13. Software Reset
- 14. Operation Mode Summary
- 15. Command Tables
- 16. Power-On/Reset State
- 17. System Considerations
- 18. Electrical Specifications
- 19. Input Test Waveforms and Measurement Levels
- 20. Output Test Load
- 21. Utilizing the RapidS Function
- 22. AC Waveforms
- 23. Write Operations
- 24. Read Operations
- 25. Detailed Bit-level Read Waveforms: RapidS Mode 0/Mode 3
- 26. Auto Page Rewrite Flowchart
- 27. Ordering Information (Standard DataFlash Page Size)
- 28. Packaging Information
- 29. Revision History