Rainbow Electronics ATtiny12 - Manual (Page 7)

7
ATtiny11/12
1006C–09/01
External RC Oscillator For timing insensitive applications, the external RC configuration shown in Figure 5 can
be used. For details on how to choose R and C, see Table 29 on page 57. The external
RC oscillator is sensitive to noise from neighboring pins, and to avoid problems, PB5
(RESET) should be used as an output or reset pin, and PB4 should be used as an out-
put pin.
Figure 5. External RC Configuration
PB4 (XTAL2)
XTAL1
GND
C
R
V
CC