Development and technical support, Package information, Bit microcontroller with infrared module maxq613 – Rainbow Electronics MAXQ613 User Manual
Page 28
16-Bit Microcontroller with Infrared Module
MAXQ613
28 _____________________________________________________________________________________
Deviations from the MAXQ610 User’s Guide
for the MAXQ613
The MAXQ610 User’s Guide contains all the informa-
tion that is needed to develop application code for the
MAXQ613 microcontroller. However, even though the
MAXQ610 and the MAXQ613 are largely code-com-
patible, there are certain differences between the two
devices that must be kept in mind when referring to the
MAXQ610 User’s Guide.
The following registers on the MAXQ610 (which are
described in the MAXQ610 User’s Guide) do not exist
on the MAXQ613, and all references to them should be
disregarded:
• Port 3 Output Register (PO3)
• Port 3 Direction Register (PD3)
• Port 3 Input Register (PI3)
• Port 4 Output Register (PO4)
• Port 4 Direction Register (PD4)
• Port 4 Input Register (PI4)
Development and
Technical Support
Maxim and third-party suppliers provide a variety of
highly versatile, affordably priced development tools for
this microcontroller, including the following:
• Compilers
• In-circuit emulators
• Integrated Development Environments (IDEs)
• Serial-to-JTAG and USB-to-JTAG interface boards for
programming and debugging (for microcontrollers
with rewritable memory)
A partial list of development tool vendors can be found
at
www.maxim-ic.com/MAXQ_tools
.
For technical support, go to
Package Information
For the latest package outline information and land patterns,
go to
www.maxim-ic.com/packages
. Note that a “+”, “#”, or
“-” in the package code indicates RoHS status only. Package
drawings may show a different suffix character, but the drawing
pertains to the package regardless of RoHS status.
PACKAGE
TYPE
PACKAGE
CODE
OUTLINE
NO.
LAND
PATTERN
NO.
32 TQFN-EP
T3255+3
32 LQFP
C32+2
44 TQFN-EP
T4477+2
44 TQFP
C44+2