Rainbow Electronics W9825G6CH User Manual

Page 9

W9825G6CH

Publication Release Date: Oct. 2004

- 9 - Revision A2

Notes:

1. Operation exceeds "ABSOLUTE MAXIMUM RATING" may cause permanent damage to the

devices.

2. All voltages are referenced to V

3. These parameters depend on the cycle rate and listed values are measured at a cycle rate with the

minimum values of t

and t

4. These parameters depend on the output loading conditions. Specified values are obtained with

output open.

5. Power up sequence is further described in the "Functional Description" section.

6. AC Testing Conditions

Output Reference Level

1.4V/1.4V

Output Load

See diagram below

Input Signal Levels

2.4V/0.4V

Transition Time (Rise and Fall) of Input Signal

2 nS

Input Reference Level

1.4V

50 ohms

1.4 V

AC TEST LOAD

Z = 50 ohms

output

50pF

7. Transition times are measured between V

and V

8. t

defines the time at which the outputs achieve the open circuit condition and is not referenced to

output level.