Rainbow Electronics W24256 - Manual (Page 4)

Preliminary W24256
- 4 -
AC Characteristics, continued
(V DD = 5V ± 10%; V SS = 0V; T A = 0 ° C to 70 ° C)
Read Cycle
PARAMETER SYM. W24256-70L/LL UNIT
MIN. MAX.
Read Cycle Time T RC 70 - nS
Address Access Time T AA - 70 nS
Chip Select Access Time T ACS - 70 nS
Output Enable to Output Valid T AOE - 30 nS
Chip Selection to Output in Low Z T CLZ * 5 - nS
Output Enable to Output in Low Z T OLZ * 5 - nS
Chip Deselection to Output in High Z T CHZ * - 20 nS
Output Disable to Output in High Z T OHZ * - 20 nS
Output Hold from Address Change T OH 3 - nS
∗ These parameters are sampled but not 100% tested
Write Cycle
PARAMETER SYM. W24256-70L/LL UNIT
MIN. MAX.
Write Cycle Time T WC 70 - nS
Chip Selection to End of Write T CW 70 - nS
Address Valid to End of Write T AW 70 - nS
Address Setup Time T AS 0 - nS
Write Pulse Width T WP 50 - nS
Write Recovery Time
CS, WE
T WR 0 - nS
Data Valid to End of Write T DW 30 - nS
Data Hold from End of Write T DH 0 - nS
Write to Output in High Z T WHZ * - 25 nS
Output Disable to Output in High Z T OHZ * - 30 nS
Output Active from End of Write T OW 5 - nS
∗
These parameters are sampled but not 100% tested