beautypg.com

Card-edge control/display, Card-edge control/display -8, Card-edge control/display (p. 3-8) – Cobalt Digital COMPASS 9363 Multi-Format Reference Generator User Manual

Page 32: Item function

background image

3

Card-Edge Control/Display

3-8

9363 PRODUCT MANUAL

9363-OM (V1.2)

Card-Edge Control/Display

Note:

If using DashBoard remote control, ignore this section. Use of these controls
is required only if DashBoard is unavailable.

Figure 3-2 shows and describes the 9363 card edge controls, indicators, and
display. Refer to 9363 Function Submenu List and Descriptions (p. 3-2) for
detailed descriptions and selections available for the controls described in
Figure 3-2.

Figure 3-2 9363 Card Edge Controls

Alphanumeric Display

Item Select

Toggle Switch

Menu Select Switch

Item

Function

Display

Displays 4-digit abbreviated code showing menu and submenu selections. When in a menu displaying a
parameter setting, the display shows parametric scalar value (and +/- sign where applicable).

Menu Select
Switch

Selects card menu as follows:

0 – Home (card info read-only display)
1 – Input Reference Source Select
2 – Reference Rate Display/Select
3 – Output Channel Select
4 – Output Format Select (for output selected in menu 3)
5 – Output Vert Delay (for output selected in menu 3)
6 – Output Horiz Select (for output selected in menu 3)
7 – Audio Output Format
8 – Audio Output Co-Timing Source Select
9 – Audio Output Tone/Mute Select
A – AES Audio Output Level

Item Select
Switch

When toggled up or down, selects available item choices for menu selected using Menu Select switch. Refer to
Table 3-1,9363 Function Submenu List (p. 3-3)” for items.

REFERENCE
LED

• Green – indicates card is receiving valid reference using selected external source

• Orange – indicates card is set to use internal source
• Off – no reference is present for selected external source

VIDEO 1 thru
VIDEO 4
LEDs

LED corresponding to output channels 1 thru 4 indicate:

• Green (solid) – Output channel is outputting genlock condition

• Green (blinking) – Output channel is outputting condition other than genlock

AUDIO LED

• Green (solid) – AES output is outputting valid AES signal
• Green (blinking) – Output channel is outputting word clock

• Off – AES or word clock is user disabled

R

E

F

E

RENCE

VI

D

E

O

1

VI

D

E

O

2

VI

D

E

O

3

VI

D

E

O

4

A

UDIO

Status

Indicators

93
63