Cobalt Digital COMPASS 9305 Embedded Audio Delay Processor - Manual (Page 56)

3
Troubleshooting
3-30 9305 PRODUCT MANUAL 9305-OM (V4.1)
9305 Card Edge Status/Error Indicators
Figure 3-6 shows and describes the 9305 card edge status indicators and
display. These indicators show status and error conditions relating to the card
itself and remote (network) communications (where applicable). Because
these indicators are part of the card itself and require no external interface, the
indicators are particularly useful in the event of communications problems
with external devices such as network remote control devices.
Figure 3-6 9305 Card Edge Status Indicators
9305
4-Character Alphanumeric Display
RM
T
REF ERR 10
80
72
0
62
5
52
5
Input Format
Indicators
Status/Error
Indicators
Item Function
Alphanumeric
Display Displays 4-digit alphanumeric code indicating status or errors as follows:
• E0XX: Video Errors
• E002: Video Acquiring Lock
• E1XX: Audio Errors
• E200: Reference is Incompatible with Input Video
• E201: Reference Standard is Invalid/No Reference Present
• E202: Reference Standard is 720p2398 (a reference standard not supported by the card)
• E203: Reference Standard is 720p2997 (a reference standard not supported by the card)
RMT LED Blue LED flashes when 9305 is receiving control message from remote network control (e.g., DashBoard™
or Cobalt
® Remote Control Panel)
REF LED Blue LED illuminates indicating 9305 is receiving valid timing reference.
ERR LED Red LED illuminates when 9305 unable to lock to timing reference, or unable to lock to input standard.
Input Format
LEDs Four blue LEDs indicate the input signal raster format being received and locked onto by the 9305 (1080,
720, 625, 525). Continuous cycling of the LEDs indicates the 9305 has not locked onto a particular format (as
in the case of no signal input).