Cobalt Digital COMPASS 9305 Embedded Audio Delay Processor - Manual (Page 42)

3
9305 Function Submenu List and Descriptions
3-16 9305 PRODUCT MANUAL 9305-OM (V4.1)
Audio Delay
Provides Delay controls for each embedded audio
output channel.
• Delay Control Adjusts relative output-to-input delay (in msec) applied to the
corresponding destination embedded channel.
(2.00 to 10500.00 msec range in 0.01 msec steps;
null = 2.0 msec (intrinsic 9305 device delay))
• Gang Pairs Checkboxes Provides delay ganging for adjacent destination embedded channel pairs
as described below. When checked, changing either control increases or
decreases both Delay control values for an adjacent pair by equal
amounts.
Table 3-2 9305 Function Submenu List — continued
Selecting either checkbox for a
left-side channel gangs the two
adjacent left-side channels.
Selecting either checkbox for a
right-side channel gangs the two
adjacent right-side channels.
Notes: • Even if an entire group is set for ganging, ganged control applies only to the opposite adjacent control
within a pair.
• The ganged control being manipulated serves as the master control, with the opposite ganged
control serving as a slave control.
• The slaved control always assumes the value as set by the master control when a master control is
manipulated, thereby maintaining identical settings for a given pair. Maintaining an offset between
controls of a ganged pair is not possible.