Turbosmart BOV ADAPTERS - Toyota Soarer - Manual (Page 2)

SOARER TT BLOW-OFF VALVE ADAPTOR INSTRUCTIONS
Head Office: Turbosmart Pty Limited, PO Box 264 Croydon, NSW, 2132 Australia Ph: +61(2) 9798 2866 Fax: +61 (2) 9798 2826 Email: [email protected]
USA Office: Turbosmart USA, 1185 Park Center Drive, Suite Q, Vista CA 92081 USA Ph: (760) 727 7610 Fax: (760) 727 7963 Email: [email protected]
PART NUMBER
FG-ADM-SOARER
Step 3. Remove the factory vacuum/boost line by
disconnecting it from the metal tube below the factory
BOV.
Step 4. Undo the hose clamp on the factory BOV
return pipe using an 8mm socket. Then disconnect the
return pipe from the BOV.
Step 5. Undo the hose clamp on the other end of the
return hose using an 8mm socket.
Step 6. Remove the return hose.
Step 7. Remove the bolt on the underside of the
factory BOV with a 10mm socket.
Step 8. Remove the bolt securing the factory BOV to
the pipe flange with a 12mm socket.