Turbosmart BOV ADAPTERS - Subaru Forester 2.0 User Manual
0l gt forester blow-off valve adaptor instructions, Step 1. locate the factory bov, Remove e
2.0L GT FORESTER BLOW-OFF VALVE ADAPTOR INSTRUCTIONS
Head Office: Turbosmart Pty Limited, PO Box 264 Croydon, NSW, 2132 Australia
Ph: +61(2) 9798 2866
Fax: +61 (2) 9798 2826
Email:
USA Office: Turbosmart USA, 1185 Park Center Drive, Suite Q, Vista CA 92081 USA
Ph: (760) 727 7610
Fax: (760) 727 7963
Email:
PART NUMBER
FG-ADM-FRST20
IMPORTANT NOTES ON FITTING YOUR BOV 2.0L GT FORESTER ADAPTOR
Turbosmart recommends that your Blow Off Valve (BOV) and Adaptor kit is fitted by an appropriately qualified technician.
ADAPTOR KIT CONTENTS
Please check that the following items have been provided in your 2.0L GT Forester adaptor Kit.
Qty
Description
Use
1
2.0L GT Forester Adaptor
Designed to specifically fit to the Forester’s intercooler
1
Flange Gasket
For fitment between the intercooler and the Forester adaptor
1
29mm Blanking Plug
To seal the factory return hose
1
450mm Length of 5mm Vacuum Hose
Connects Blow-Off-Valve to the intake manifold fitting
1
6mm hose spring clamp
Secures the 6mm end of the Silicon hose assembly to engine manifold fitting
1
5mm hose spring clamp
Secures the 5mm end of the Silicon hose assembly to the Turbosmart BOV
Note:
This Forester Adaptor readily accepts the following Turbosmart BOVs:
Blow Off Valve Name
Part No.
Blow-off Valve - Vee Port
FG-BOV-002VP
Blow-off Valve - Supersonic
FG-BOV-003SS
Blow-off Valve – Dual Port
FG-BOV-003DP29
Blow-off Valve – Plumb Back
FG-BOV-003PB29
FITTING YOUR BOV GT FORESTER ADAPTOR
Note: Please thoroughly read and understand both these instructions and the fitting instructions supplied with your
BOV before commencing this installation.
Step 1. Locate the factory BOV.
Step 2. Using a 12mm socket or spanner, undo the
two nuts securing the factory BOV. Remove the hose
clamp securing the return hose and disconnect the
return hose from the factory BOV.
Step 3. Disconnect the two vacuum/boost lines
connected to the factory BOV.
Step 4. Remove the factory BOV and old factory
gasket.
REMOVE
E
REMOVE
REMOVE
Undo
Factory
BOV