Turbosmart BOV ADAPTERS - Subaru WRX MY98 - Manual

WRX MY98 BLOW-OFF VALVE ADAPTOR INSTRUCTIONS
Head Office: Turbosmart Pty Limited, PO Box 264 Croydon, NSW, 2132 Australia Ph: +61(2) 9798 2866 Fax: +61 (2) 9798 2826 Email: [email protected]
USA Office: Turbosmart USA, 1185 Park Center Drive, Suite Q, Vista CA 92081 USA Ph: (760) 727 7610 Fax: (760) 727 7963 Email: [email protected]
PART NUMBER
FG-ADM-MY98
IMPORTANT NOTES ON FITTING YOUR BOV WRX MY98 ADAPTOR
Turbosmart recommends that your Blow Off Valve (BOV) and Adaptor kit is fitted by an appropriately qualified technician.
ADAPTOR KIT CONTENTS
Please check that the following items have been provided in your WRX MY98 adaptor Kit.
Qty Description Use
1 MY98 Adaptor Designed to fit your MY98 WRX
1 730mm 5mm Silicon hose assembly Connects the vacuum/boost source to the Turbosmart BOV
1 34mm Blank To blank off the plumb-back fitting
1 250mm cable tie To secure the BOV from movement
1 5mm spring clamp Secures 5mm end of the vacuum/boost hose onto the BOV
1 6mm spring clamp Secures 6mm end of the vacuum/boost hose to the vacuum source
Note: This WRX MY98 Adaptor readily accepts the following Turbosmart BOVs:
Blow Off Valve Name Part No.
Blow-off Valve - Vee Port FG-BOV-002VP
Blow-off Valve - Supersonic FG-BOV-003SS
Blow-off Valve - Megasonic FG-BOV-003MS
Blow-off Valve - Plumb Back 34mm Outlet FG-BOV-003PB34
Blow-off Valve - Dual Port 34mm Outlet FG-BOV-003DP34
FITTING YOUR BOV WRX MY98 ADAPTOR
Note: Please thoroughly read and understand both these instructions and the fitting instructions supplied with your
BOV before commencing this installation.
Step 1. Locate the boost hose.
Step 2. Loosen the top hose clamp securing the boost
hose to the intercooler.
Step 3. Loosen the bottom hose clamp securing the
boost hose to the factory BOV. Step 4. Remove the boost hose.
Boost Hose
Boost Hose