Safety decals, Warning, Decal – Grain Systems Unload Augers PNEG-1050 User Manual
Page 13
13
12" & 14" Commercial Bin Sweep Augers PNEG-1050
Decal
KEEP OUT OF BIN WHILE SWEEP IS IN OPERATION
RAPIDLY TRAVELING SWEEP AUGER
FAILURE TO HEED WILL RESULT IN
SERIOUS INJURY OR DEATH
DC-1384
Check components shown below to insure that the safety decals are in place and in good condition. If a decal cannot be
easily read for any reason or has been painted over, replace it immediately. Contact your dealer or the manufacturer to
order a replacement decal free of charge.
DANGER Sign No. DC-1395 was supplied with your bin unload-
ing equipment. This safety sign should be applied
to the side of the bin near the bin opening, so it will be viewed
by people entering into the bin storage building.
Do not cover any safety signs or any other signs that are
already there.
Please remember, safety signs
provide important safety information
for people working near bin unload-
ing equipment that is in operation.
If the Safety Sign cannot be easily read for any reason or has been painted over,
replace it immediately. Additional Safety Signs may be obtained free of charge from
your dealer, distributor, or ordered from the factory.
SAFETY DECALS
SHEAR POINT
Keep hands clear of moving
parts. Do not operate with
guard removed. Disconnect
and lockout power before
servicing.
DC-994
Located on Outside of Belt Guard
DC-995
Located Inside Belt Guard
DC-994
Located on Shield
DC-1384
Located Outside Bin Door
DC-1395
Located on Tractor Drive Chain Guards
DC-1386
WARNING
SHEAR POINT
DC-995
Keep hands clear of moving
parts. Do not operate with
guard removed. Disconnect
and lockout power before
servicing.
SHEAR POINT
Moving parts can
crush and cut. Keep
hands clear of
sprocket and chain.
DC-1386
THIS BIN IS EQUIPPED WITH GRAIN AUGERS
WHICH CAN KILL OR DISMEMBER.
ROTATING FLIGHTING!
KEEP CLEAR OF ALL AUGERS AND NEVER ENTER
THIS BIN UNLESS ALL POWER IS
DISCONNECTED AND LOCKED OUT.
FAILURE TO DO SO WILL RESULT IN
SERIOUS INJURY OR DEATH!
DC-1395