Grain Systems PNEG-365 - Manual (Page 42)

Grain Systems, Inc. Assumption, Ill.
42
18' Manual Batch
INSTALLATION OF OPTIONAL ROOF-MOUNTED LEVEL SWITCHES
Attach flex-coupling to the power-pak and install roll pin. Apply teflon tape or pipe sealant (not in-
cluded) to power-pak pipe threads and thread power-pak into mounting plate coupling. Conduit opening
in power-pak should be at right angles to roof rib or face toward eave.
Caulk underside of mounting plate above and both sides of 2" hole. Bolt to roof panel.
Overflow Level Switch
TAF-6103
5
30º Roof Panel
Figure #48
3
4
1
2
Key Part No. Description Quantity Weight
1 TD-100076 Rotary Switch Power-Pak 1 3.50
2 TD-100627 Roof Mount Coupling Weldment 1 2.14
3 TD-100075 Flex-Coupling 1 0.50
4 S-7241 1/8" x 1.1/4" Cotter Pin 2 0.02
5 TAF-6086 3-Vane Paddle 1 0.75
* TAF-6097 Hardware Package 1 0.98
-- PNEG-300 Rotary Switch Instructions 1 0.04
-- S-275 5/16" - 18 x 3/4" Bin Bolt 6 0.16
-- S-3651 Tube Seal 1 0.74
-- S-396 5/16" - 18 Hex Nut 6 0.06
-- S-7241 1/8" x 1.1/4" Cotter Pin 2 0.02
- Included in Hardware
Package
* Hardware Package not
shown
REV. 9-30-96