Grain Systems PNEG-1891 - Manual (Page 35)

Chapter 6: Installing the Wet Bin
1. At each end of the dryer, attach the end plate connectors to the corners of the dryer wet bin, (see
Figure 6-4, page 35 ).
2. Raise the dryer wet grain bin sides (B) and secure them to the end plate connectors (A), (see Figure
6-5, page 36 ).
NOTE: Do not connect the side of the dryer wet bin that is adjacent to the load auger motor. Leave
this side open to allow for easy access when attaching the belt guard body.
Figure 6-4 The end plate connectors of the dryer wet bin
A End plate connector
Pneg-1891 Portable Dryers 35