Grain Systems PNEG-1891 - Manual (Page 20)

Chapter 3: Dryer Supports
Figure 3-6 Installing leg stands along dryer frame
Callout Part number Description
A S-3883 Original bolts installed on dryer (1/2 in. - 13 X 1 3/4 in. zinc
grade 8 HHCS bolt)
B S-6493 Original nuts installed on dryer (1/2 in. - 13 zinc grade 2
deformed lock nut)
C D01–1221 Shim dryer stand to dryer
NS S-2121 1/2 in. X 1 3/8 in. flat washer
D S-8506 1/2 in. -13 zinc flange nut
E S-8856 1/2 in. - 13 X 1 3/4 in. zinc grade 5 flange bolt
F D01–0007 Basket corner leg
G D01–xxxx For leg stand, refer to Guidelines for Supporting the Dryer with
Leg Stands, page 16
H FC-42077 Shim plate
Installing the Leg Stands Behind the Hitch Frame
Use leg stands behind the hitch frame to appropriately support the dryer.
20 Pneg-1891 Portable Dryers