Grain Systems Tanks PNEG-4060 - Manual (Page 88)

Chapter 7: Roof Assembly
Figure 7-9 Installing a temperature cable bracket
A Roof rafter D Left purlin clip (CTR-0489)
B 8 in. temperature cable bracket (CTR-0172) E 7/16 x 1-1/4 in. flange bolt (S-10250)
C Right purlin clip (CTR-0490) F 7/16 in. flange nut (S-10251)
3. Install a quick link (C) to each cable bracket (B) to support the temperature cables.
IMPORTANT: Do not attach weights to the temperature cables; secure the bottom of cables to the
floor with light twine. No roof rafter shall support more than one cable.
88 Pneg-4060 60 Ft Diameter 40-Series Bin