Grain Systems Tanks PNEG-4060 - Manual (Page 78)

Chapter 7: Roof Assembly
Attaching the Eave Bracket to the Inside Stiffener
Eave brackets secure the roof rafter to the sidewall.
Before You Begin
Install the inside stiffeners to the sidewalls before proceeding.
1. Attach the eave bracket (A) to the inside stiffener (C) and install flange bolts (D).
2. Install flange nuts (B) to the eave bracket and tighten to the recommended torque specifications. See
Bolt Torque Specifications, page 29 .
Figure 7-3 View from inside of the sidewall of a bin
A Eave bracket (CTR-0498) C Inside stiffener (CTS-2069XX)
B 3/8 in. flange nut (S-9426) D 3/8 x 1 in. flange bolt (S-7485)
After You Finish
Repeat this process for the remaining eave brackets.
78 Pneg-4060 60 Ft Diameter 40-Series Bin