Grain Systems PNEG-1797 - Manual (Page 35)

6. Vision Touch Screen Display
PNEG-1797CE CE Approved T-Series Tower Dryer 35
Setting the Timers
Press to open the timers screen. (See Figure 6E.)
Figure 6E
1. Press to set the load system delay during unload. Reduces load motor cycling.
2. Press to set the dryer shut down delay after the OUT OF GRAIN switch opens.
Set to the maximum time for the dryer to refill during drying (this is displayed during loading on
the screen).
3. Press to set the time between sequential fan starts (multiple fan dryers only).
4. Press to set the unload system overrun following metering system shut down
(allows unload system to clear itself).
Operation screen for setting timers
Modifying timer set point