Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Tuner- Six-Gun Diesel Tuner & SpeedBrake, For use with Banks iQ '03-07 Compatible with PowerPDA - Manual (Page 38)

38
96825 v.6.0
Figure 37
Section 10
UPDATING BANKS IQ/POWERPDA & BANKS SIx-GUN/SPEEDBRAKE
SOFTWARE
If a Tuner has been previously
installed, verify that the Tuner has
the latest version firmware. Check
your version to the current version
available on the Banks website.
SpeedBrake may not function
properly if Tuner/SpeedBrake
firmware is not up to the current
version.
To update your PowerPDA go to
www.bankspower.com/downloads and
follow the updating instructions.
System Info
To view your System Information, press the
‘System Info’ button in the ‘Adjustments’
menu (Refer to your Banks iQ Owner’s
Manual to open the ‘Adjustment’ menu). See
Figure 37. Use this info to verify that you
are downloading the correct update/upgrade
version for your Banks iQ. Press the ‘Return ‘
icon to go back to the ‘Adjustment’ menu.
To update Six-Gun/SpeedBrake
Software
1.
Go to www.bankspower.com/
downloads and check for the Banks
Power Tuner or SpeedBrake updates.
2.
Download them onto your Micro-SD
card (sold separately) and insert it into
the port on your Banks iQ/PowerPDA.
3.
Press the ‘Update Tuner/SpeedBrake’
button in the ‘Adjustment’ menu.
4.
Press the ’check For Updates’ button
and available SpeedBrake updates will
appear in the window. See Figure 38.
Highlight the appropriate file name from
the available list.
5.
Press ‘Update Six-Gun/SpeedBrake’ to
download updates into Banks iQ.
NotE: A warning message will appear if
the chosen file is the same or older then
the file currently in use.
To update Banks iQ Software
1.
Plug Banks iQ into your Pc using the
supplied USB cable.
2.
Go to www.bankspower.com/
downloads and click on ‘check for
Updates’.
3.
Follow the on-screen directions on
your Pc to update your Bank iQ with the
latest software updates.
-END, SECTION 10-