Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Interface- PowerPDA Ford (03-09), Chevy (01-08), Dodge (03-07) User Manual
Page 35
96801 v.9.0
35
NOTE: Six-Gun Tuning requires that the
PDA is in the Docking Station and the
ignition key is ON.
The Banks PowerPDA is designed to
allow the user the ability to adjust
various parameters for a custom
Speed-Loader tune. Customizing
the Speed-Loader level with your
PowerPDA will allow the user to fine
tune the Speed-Loader power level for
an assertive responsive feel to an all
out aggressive Speed-Loader power
setting.
Note: This feature is only available on
the Speed-Loader power level.
1.
Press the center button on the
5-way navigator. Press the ‘More>’ to
go to System Menu 2 of 2.
2.
Next, touch the ‘Six-Gun Tuning’
button.
WARNINg! Using this feature of the
Banks PowerPDA will allow you
to modify the tuning parameters
within the Six-gun tuner. By doing
so you accept all risks and agree
to the warning and limitations
of liability stated in the Six-gun
owner’s Manual. Any modifications
are logged within the Six-gun
tuner.
3.
Before continuing in modifying
any Six-Gun Tuner parameters, read
“WARNING AND LIMITATION OF
LIABILITY STATED IN THE SIX-GUN
OWNERS MANUAL”. If you agree to
the liability then touch the button
labeled ‘I Accept’. See Figure 59.
4.
Select the desired tuning
parameter to edit by using the ‘Up’
and ‘Down’ buttons.
NOTE: For our example we will use
the parameter ‘Accelerator Pump’.
See Figure 61.
5.
Touch the button labeled
‘Parameter Info’ to view critical
information about the highlighted
parameter. See Figure 60.
6.
Touch the button labeled ‘ to return to the previous menu. 7. Press the button labeled ‘Modify’ to enter the ‘Modify Tuning Parameter’ screen. See Figure 62. 8. To increase the currently displayed value, touch the button labeled ‘Increase’. 9. To decrease the currently displayed value, touch the button labeled ‘Decrease’. Section 14 SIX-gUN TUNINg Figure 59 Figure 60