Rough Country PERF663 - Manual (Page 2)

1661C-4” KIT / 1662C-6” KIT
Fr Coil Springs (A)
Rr Side Coil Spring
1085 Fr Adj Track Rod Kit
1-Track Rod Body (D)
1-Track bar Bracket (E)
1085Bag:
For Front Track Rod Bracket
2-Frame Crush Sleeves
1-1/2” x 1 3/4” Bolt
2-1/2 x 3 1/2” Bolt
7-1/2” Flat Washer
3-1/2” Lock Nuts
For Front Adjustable Track Rod
2-7/16” x 2 3/4” Bolt
4-7/16” Flat Washers
2-7/16” Lock Nut
1-3/4” Jam Nut
2-Track Bar Bushings
1-Track Bar Sleeve (ID 7/16”)
1-Heim Joint
2-Heim Spacers
1086-Rr Adj Track Rod Kit
1-Track Rod Body & Heim End (F)
1086Bag:
For Rear Track Rod
1-Sleeves
2-Bushings
1-Jam
Nut
2-Heim Spacers
1663Box1:
1-Dr Side Control Arm Mount (G)
1-Pass Side Control Arm Mount (H)
1-Rear Track Bar Bracke(I)
1-Rubicon Compressor Bracket
2-Front Upper Adj Arms (J)
1663Box2:
2-Front Lower Adj Arms (K)
4-Large Arm Ends
4-Small Arm Ends
1663Bag1:
For Control Arm Mounts:
4-1/2” x 4” Bolts
8-1/2” Washers
4-1/2” Lock nuts
For Transfer Case Skid Plate
6-9/16 x 4 1/2” Bolts (97-02)
OR 6-12mm x 65mm Bolts (03-06)
6-Flat
Washers
For Front Lower Control Arms
2-9/16” x 4” Bolts
4-9/16” Flat Washers
2-9/16” Lock Nuts
For Front Upper Control Arms
2-10mm x 80mm Bolts
4-10mm Flat Washer
2-10mm Lock Nuts
1663Bag5:
For Rear Lower Control Arm:
2-9/16” x 7” Bolts
4-9/16” Flat Washers
2-9/16” Lock Nuts
For Rear Track Bar Bracket
2-5/16” x 1” Bolt
4-5/16” Flat Washers
2-5/16” Lock Nuts
1-12mm x 65mm Bolt
1-12mm Flange Lock
1-Crush Sleeve
For use with Rubicon Models:
For Compressor Bracket
4-5/16” x 1” Bolts
4-5/16” Lock Nuts
8-5/16” Flat Washers
4-Lower End Component Bag
4-Upper End Component Bag
1-Adjustable End Tool Bag
1663Box3
1-Dr Side Fr Mnt Disc Brkt (L)
1-Pass Fr Mt Disc Brkt (M)
2-Front Sway Bar Links (N)
2-Fr Bump Stop Pucks (O)
2-Front Stainless Brake Lines (P)
1-Pitman Arm (Q)
1-Rear Stainless Brake Line (R)
2-Rear Straight Sway Bar Links (S)
2-Rear Shock Re-locator (T)
1-Hardware Bag
1663Bag3:
For Front Bump Stop
2-3/8” x 3 1/2” Self Tapping Bolt
For Fr Brake Lines
4-3/8” Brake Washers
2-Frame Brackets
2-Brake Clips
For Rear Brake Line:
1-Brake Line Bracket
1-Brake Line Clip
For Rear Shock Bracket
2-12mm x 65mm Bolts
2-12mm Flange Lock Nuts
2-5/16” x 3/4” Bolts
4-5/16” Flat Washers
2-5/16” Lock Nuts
2-Crush Sleeve
4-7/16” Flat Washers
For Rear Sway Bar
4-10mm ID Sleeves
4-10mm x 60mm Bolts
2-10mm Lock Nuts
2-10mm Flat Washers
Sway Bar Disconnect Bag:
For Fr Sway Bar Disconnect:
4-1/4” x 3/4” Bolts
4-1/4” Flat Washers
2-3/8” x 1 1/4” Bolts
2-3/8” Flat Washers
2-Fr Disconnect Mounts
2-Disconnect Pins
2-Hitch pins
2-Rod Ends
2-1/2” Nuts
2-1/2” Flat Washer
2-1/2” Flange Lock Nut
2-1/2” Jam Nut
1663Box4
2-Rear Lower Adj Arms (U)
2-Rear Upper Adj Arms (V)
Perf2.24TJ:
2-2.2 Series RCX Front Shock (W)
2-2.2 Series RCX Rear Shock (X)
KIT CONTENTS
This kit is packaged in 8 boxes. Please makes sure you have all the need parts and understand where they go prior
to beginning installation. Please use the attached picture to match parts to their descriptions shown below.