Rough Country 51124-15 - Manual (Page 8)

51124 pg 8
Rev. B 0204
Step Thirteen
Insert the Tailgate Bar into the mounts on each side of the
tailgate opening with the vinyl side of the Rear Window toward
the outside of the vehicle.
Place Tailgate Bar
in mounts
Step Fifteen
Inside the top locate the flaps sewn to the
top on each side of the rear window open-
ing. Pull the flaps over to cover the zipper
and tuck them in.
Rear Window
Pull flap over to cover
zipper and tuck in
View from inside top
Pull both sliders down
as far as possible to
catch pin
Start Zipper
Tuck Flaps
under top
Step Fourteen
To start the zipper, pull the two sliders as far down as possible
on the driver's side of the window in order to catch the sliders
to the pin.
Once the zipper is caught, start the top slider 1/2". Then hold
up the top of the window with one hand and close the
zipper with the other. The zipper is sandwiched between
layers of fabric in the corners so be careful not to catch
extra fabric in the zipper. Close the zipper.
Make sure that the Tailgate Bar is centered and is securely in
the mounts. Then tuck the flaps on the Rear Window under
the top fabric.