Toner Cable RX8200 Advanced Modular Receiver - Manual (Page 7)

Specifications Subject To Change Without Notice Rev 06-11 ©Toner Cable Equipment, Inc.
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
RX8200
Advanced Modular Receiver
Data and Control Options
RS232 Remote Control and Data
(FAZ 101 0113/17)
Remote control connector: 1x 9-pin D-type
RS232 remote control
Ericsson Alteia protocol
RS232 data connector: 1x 9-pin D-type
RS232 asynchronous data
RS232 data rate: Max. 38.4 kbps
IP High Speed Data (FAZ 101 0113/35)
MPE based data de-encapsulation
Max. bit-rate: 100 Mbps
Requires IP TS output card
Audio Options
Balanced Audio Output (FAZ 101 0113/3)
Connector: 2x 9-Pin D-type
Analog audio: two balanced stereo pairs
Digital audio: two balanced stereo pairs
Order QTY 0, 1 or (2 - requires RX8200/
SWO/4AUD)
Unbalanced Audio Output
(FAZ 101 0113/19)*
Connector: 2x BNC (F) 75 Ohm
Digital audio: two balanced stereo pairs
Order QTY 0, 1 or (2 - requires RX8200/
SWO/4AUD)
Standard with any Video Decode Option:
2x MPEG-1 Layer-II audio decode
2x Dolby® Digital Plus Pass-through
2x Dolby®E pass-through
2x Linear PCM decode
Audio sampling rate: 48 kHz
Decoded audio gain adjustment
Dolby® Digital (FAZ 101 0113/22)
2x Dolby® Digital 5.1 decode and down-mix
to 2.0
2x Dolby® Digital 2.0/5.1 pass-through com-
pressed and embedded in (HD)SDI
1x Dolby® Digital 5.1 decode
Dolby® Digital Plus*
2x Dolby® Digital Plus 2.0/5.1 pass-through
compressed and embedded in (HD)SDI
AAC Audio (FAZ 101 0113/21)
2x 5.1 down-mix to 2.0
2x 2.0 decode
1x 5.1 decode
Phase Aligned Audio (FAZ 101 0113/49)
MPEG-1 Layer II audio
4x stereo pairs, Phase aligned to enable 5.1
carriage
2x stereo pairs, non phase aligned audio
Requires 4x audio license FAZ 101 0113/20
4x Audio Capability (FAZ 101 0113/20)
Extends licensed audio decodes to more
channels
6x MPEG-1 Layer II audio decode
6x Dolby® Digital 2.0 decode, 5.1 to 2.0
downmix
4x Dolby® Digital 2.0/5.1 pass-through -
compressed and embedded in (HD)SDI
4x Dolby® Digital Plus 2.0/5/1 pass-through
- compressed and embedded in (HD)SDI
6x 5.1 AAC down-mix to 2.0
6x 2.0 AAC decode
4x Dolby®E pass-through
4x Linear PCM pass-through
Physical and Power
Dimensions (W x D x H)
442.5 x 545 x 44mm (17.5“ x 20.7“ x 1.75“
approx.)
Input Voltage
110 VAC / 240 VAC
Power Consumption
120W Max. (depending on options fitted)
Cooling
Integrated fan
Environmental Conditions
Operating Temperature
0°C to +50°C (32° to 122°F)
Storage Temperature
-20°C to +60°C (-4° to 140°F)
Relative Humidity
5% to 95%
Compliance
CE marked in accordance with EU Low
Voltage and EMC Directives
EMC Compliance
EN55022, EN61000-3-2, EN61000-3-3,
EN55024, CISPR22, FCC CFR47 Part 15B
Class A
Safety Compliance
EN60950-1, IEC60950-1, UL60950-1
SPECIFICATIONS ERICSSON RX8200 ADVANCED MODULAR RECEIVER