Toner Cable RX8200 Advanced Modular Receiver - Manual (Page 2)

INPUT OPTIONS
The RX8200 Advanced Modular Receiver has a single ASI input
as standard and can be configured with one additional choice of
inputs type.
Satellite Input Options
The RX8200 satellite input modules come with DVB-S QPSK sup-
port as standard. The unit can optionally be licensed to support
the new highly efficient DVB-S2 satellite transmission standard.
DVB-S2 Capable Satellite Demodulator
(RX8200/HWO/DVBS2, FAZ 101 0113/5)
• 4x L-band inputs
• DVB-S QPSK demodulation
• DVB-S2 QPSK, 8PSK demodulation with license keys
Second Generation DVB-S2 Capable Satellite Demodulator
(RX8200/HWO/DVBS2/2, FAZ 101 0113/6)*
• 4x L-band inputs
• DVB-S QPSK demodulation
• DVB-S2 QPSK, 8PSK, 16APSK demodulation with license
keys
• DVB-S2 multi-transport stream capability with license key
DVB-S2 QPSK License
(RX82XX/SWO/DVBS2/QPSK, FAZ 101 0113/32)
• Adds DVB-S2 QPSK capability to DVB-S2 input option card
DVB-S2 8PSK License
(RX82XX/SWO/DVBS2/8PSK, FAZ 101 0113/30)
• Adds DVB-S2 QPSK, 8PSK capability to DVB-S2 input
option card
DVB-S2 16APSK License
(RX82XX/SWO/DVBS2/16APSK, FAZ 101 0113/29)
• Adds DVB-S2 QPSK, 8PSK and 16APSK capability to DVB-
S2 input option card
• Second generation DVB-S2 card (RX8200/HWO/DVBS2/2,
FAZ 101 0113/6) only
DVB-S2 VCM License
(RX82XX/SWO/DVBS2/VCM, FAZ 101 0113/56)
• Provides DVB-S2 Multi-transport stream input capability
• Single transport stream output from receiver
• Second generation DVB-S2 card (RX8200/HWO/DVBS2/2,
FAZ 101 0113/6) only
DVB-S2 Low Symbol Rate License
(RX82XX/SWO/DVBS2/LSYM, FAZ 101 0113/31)
• Enables DVB-S2 symbol rate of 1 Msym/s to 5 Msym/s
IP Transport Stream Input Options
The RX8200 may be configured with IP transport stream input
connectivity via the following options.
100/1000BaseT Input
(RX8200/HWO/IP/GIGE, FAZ 101 0113/12)
• MPEG transport stream over IP
• 2x 100/1000BaseT input
• Very low latency
SMPTE 2022M Pro-MPEG FEC License
(RX8200/SWO/IP/PROMPEG, FAZ 101 0113/37)
• Enables SMPTE 2022M Pro-MPEG FEC capability for the IP
input card
• Requires IP input card
G.703 ATM Input Option
The RX8200 may be configured with G.703 ATM connectivity.
G703 ATM Input (RX8200/HWO/G703, FAZ 101 0113/8)
• E3 or DS-3 inputs
• 34 Mbps or 45 Mbps rates
Input Redundancy
The RX8200 Advanced Modular Receiver offers as standard auto-
matic redundancy switching between ASI input and the additional
input option. This redundancy switching capability may be further
enhanced with the following option.
Null Packet Detection Redundancy Switching
(RX82XX/SWO/NULL, FAZ 101 0113/48)
• Redundancy switching from primary to secondary input
triggered by presence of null packets in the incoming stream
• User definable percent of null packets to trigger redundancy
switch
CONFIGURATION PHILOSOPHY
The RX8200 Advanced Modular Receiver offers ultimate config-
urability at the point of order allowing the unit to be tailored to your
precise needs incorporating just the functionality you require thus
allowing an individual and optimal balance of price against func-
tionality.
To configure your individual receiver follow this simple configura-
tion philosophy to allow easy selection of all the features that you
require.
ERICSSON RX8200 ADVANCED MODULAR RECEIVER