Toner Cable RX8200 Advanced Modular Receiver - Manual (Page 5)

STANDARD FEATURES
Input Interfaces
ASI Transport Stream Input
Connector: 1x BNC (F) 75 Ohm
Max. input rate: 160 Mbps
Packet length: 188/204 byte packets
Standard: EN50083-9
Features
Program selection for ATSC, DVB and
MPEG-only streams
One alarm relay, two relays under SCTE 35
control
Service cycling through all decodable
services
Control
Front panel keypad and LCD
SNMP control, traps and alarms
Web browser
INPUT OPTIONS
Satellite Input Options
Satellite Input (FAZ 101 0113/5) and
(FAZ 101 0113/6)
Connector: 4x F-Type (F), 75 Ohm
Modulation: DVB-S QPSK
Standard: EN300 421
Frequency range: 950 MHz to 2150 MHz
Input level: -25 dBm to -65 dBm
Symbol rate: 1 Msyms to 45 Msyms
(DVB-S),1ψ(5) Msyms to 31 Msyms
Bit rate: 81Mbps
FEC, DVB-S: 1/2, 2/3, 3/4, 5/6, 7/8
LNB Power: 13V, 18V or off, 22 kHz on/off
Satellite Input (FAZ 101 0113/6)
Provides the following additional functionali-
ty: DVB-S2 FEC frame: Short & Normal
frames
Physical layer scrambling
Symbol rate: 1ψ(5) Msyms to 31Msyms,
60Msyms on inputs 1, 2
Bit rate: 170Mbps Max
FEC DVB-S2 QPSK: 1/4, 1/3, 2/5
16APSK via additional license
DVB-S2 multi-transport stream via addition-
al license
IDVB-S2 QPSK (FAZ 101 0113/32)
Modulation: DVB-S2 QPSK
Standard: EN302 307
Symbol rate: 5 to 31 (60) Msyms
FEC DVB-S2 QPSK: 1/2, 3/5, 2/3, 3/4, 4/5,
5/6, 8/9, 9/10
DVB-S2 8PSK (FAZ 101 0113/30)
Includes DVB-S2 QPSK functionality
Modulation: DVB-S2 8PSK
FEC, DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9,
9/10
DVB-S2 16APSK (FAZ 101 0113/29)
Includes DVB-S2 QPSK and 8PSK
functionality
Modulation: DVB-S2 16APSK
FEC, DVB-S2 16APSK: 2/3, 3/4, 4/5, 5/6,
8/9, 9/10
Requires FAZ 101 0113/6 option
DVB-S2 Low Symbol Rate (FAZ 101
0113/31)
Symbol rate - extended to 1 to 31 (60)
Msym/s
Applies to DVB-S2 modes only
IP Input Options
MPEG over Gigabit Ethernet IP Input
(FAZ 101 0113/12)
Connector: 2 x RJ 45
Format: 100/1000BaseT
Max. input rate: 208Mbps
SMPTE 2022M Pro-MPEG FEC (FAZ 101
0113/37)
SMPTE 2022M (Pro-MPEG) FEC
G703 Input Options
Ericsson G.703 (FAZ 101 0113/8)
Connector: BNC (F)
Network: G.703 compliant PDH
Input: E3 or DS-3 (selectable)
Bit-rates: 34 Mbps or 45 Mbps versions
VIDEO AND TS OUTPUT OPTIONS
Video Output Options
SD Video Output (FAZ 101 0113/18)
Composite Video
Connector: 2x BNC (F) 75 Ohm
Format: PAL / NTSC
SDI/DVB ASI-C (Switchable)
Connector: 2x BNC 75 ohms
SD-SDI standard: SMPTE 259M
Embedded Audio: SMPTE 272M (SD)
Embedded Audio Channels: two, four or six
stereo pairs
ASI standard: EN50083-9
HD and SD Video Output (FAZ 101
0113/10)
Composite Video
Connector: 1x BNC (F) 75 Ohm
Format: PAL / NTSC
Video RGB-HD (SVGA)
Connector: 1x 15-pin D-type
Format: RGB H&V/YPrPb (switchable)
SDI/HD-SDI/DVB ASI-C (switchable)
Connector: 3x BNC 75 ohms
3 Gbps HD-SDI standard: SMPTE 424M
HD-SDI standard: SMPTE 292M
SD-SDI standard: SMPTE 259M
Embedded Audio: SMPTE 299M (HD)
SMPTE 272M (SD)
Embedded Audio Channels: two, four or six
stereo pairs
ASI standard: EN50083-9
TS Output Options
For ASI Output See HD and SD video
output options
IP Output (FAZ 101 0113/14)
Transport encapsulation into IP
MPTS/IP/UDP
SPTS/IP/UDP with single service filtering -
CBR mode
IP output VBR mode - Null packets dropped
2x Gigabit Ethernet outputs, 100/1000
autosensing
ψLicense key dependant
SPECIFICATIONS ERICSSON RX8200 ADVANCED MODULAR RECEIVER
SAMPLE CONFIGURATION
Sample configuration with: Satellite input, frame sync, HD video output, IP transport stream output and 2x audio output modules installed